Solar collectors are installed on the roofs on the south side or placed elsewhere in the swimming pool in the owner's territory.

The required number of collectors depends on the size of the pool and the specifics of use. The collectors are connected in a closed circuit to a specially designed chlorine-resistant pool heat exchanger. The closed circuit is filled with non-toxic and non-freezing glycol liquid "SolarEko", which also has anti-corrosion properties.

When the sun's radiation reaches the absorbing surface through the solar glass, heat is generated. If the pool needs heat, the modulating pump switches on and the heat from the collectors enters the heat exchanger.

The heat exchanger transfers heat (but not glycol liquid) to the pool water. Heat exchange is performed instantly before the pool water is returned to the pool after filtration. If the temperature in the collectors is higher than in the pool, then our system will heat the swimming pool from the sun.